FMS333 HIGH TEMP GASKET MAKER SILICONE ACETIC
Properties:
High-speed vulcanization at room temperature, good performance of aging resistance, good oil, water, diluted acid, diluted alkali resistance, high and lower temperature resistance, the sealant can be used at -40℃ to 260℃, temporary 300℃, with good seal, antiknock characteristics and shock resistance.
Uses:
The product can be used for the seal of cover joint of automobile, motorcycle and all kinds of hydraulic machinery, water pump, oil pump, hydraulic pump and air compressor etc.
Applications:
The product can replace rubber gasket, asbestos gasket, cork and paper gasket, it can be used for the seal of cover joint of engine, gear case and casing in automobile, motorcycle and other machinery.
Instructions:
Keep the surface dry and clean by clearing away greasy dirt and dust
Smear the products on the surface as a continuing gum turn.
.Fixed by bolt according to common practice
Not until it cures completely(≥24h), can the product form elastic gasket to have sealing and leak proof effect.
Notes:
1. Because of its odor of volatility, the product must be kept well ventilated.
2. Try to avoid your skin touching sealant for long time. And once it gets into eyes accidentally, flush with water or go to see the doctor immediately.
3. Not to be touched by children, as well as not to be taken orally.
4. Seal up the remainder restrictedly and store it in cool, dry and draughty places.
Storage:
Keep in dry place and keep a storage temperature below 25℃ to prolong its service life; 14 months guarantee.
Packing:
32gram, 85gram, 100gram per tube, 12 tubes in a box, 12 boxes in a master carton
Color:
Red, black, white, transparent, grey, blue or on request;